Plastics Machinery
- > ANCILLARIES - DIE TEMPERATURE CONTROLLERS (4)
- > ANCILLARIES - HOPPER DRYERS (15)
- > ANCILLARIES - HOPPER LOADERS (5)
- > ANCILLARIES - OTHER (11)
- > EXTRUDERS (20)
- > EXTRUSION LINES - COMPONENTS (5)
- > EXTRUSION LINES - OTHER (1)
- > EXTRUSION LINES - PIPE, HOSE & TUBE (3)
- > EXTRUSION LINES - PROFILE (1)
- > GRANULATORS / SHREDDERS (30)
- > MACHINE COMPONENTS (1)
- > MOULDERS - INJECTION (66)
- > OTHER - PLASTICS MACHINERY (6)
- > PLASTICS MOULDER ROBOTS (6)
SUPERMASTER SM1500
Please view details of our SUPERMASTER SM1500. You can enquire about this machinery by filling in the form below. Or you can contact us directly on (03)-9706 8066 or email sales@appliedmachinery.com.au.
Stock No:
90508
Type:
Injection Moulder
Category:
Moulders - Injection
Manufacturer:
Supermaster
Model:
SM1500
Year:
NEW
Specifications:
NEW Supermaster Twin Platen Injection Moulding Machine, model SM1500
Features include:
CLAMPING SYSTEM
- 1500 ton clamping force
- 2400mm opening stroke
- 3100mm maximum daylight
- 700-1400mm min/max mould height
- 1520 x 1420mm between tie bars
- 2400 x 2400mm platen size
- 20 ton x 250mm hydraulic ejector
INJECTION SYSTEM
- shot volume (cm3) 7433 / 9247
- shot weight(PS) (g) 6838 / 8508
- screw diameter (mm) 130 / 145
- injection pressure (kgf/cm2) 1860 / 1490
- injection rate (cm3/sec) 1213 / 1509
- plasticising capacity(PS) (g/sec) 162 / 201
- screw stroke 560mm
- screw rotation 0-120rpm
POWER SYSTEM
- 205kW (275Hp) pump motor
- 61.4kW / 67.8kW heating capacity
- 175kgf/cm2 maximum system pressure
- 3000L oil tank capacity
GENERAL
- dimensions (LxWxH mm): 12000 x 3800 x 3700
- weight (ton): 84.4
CONTROL
- CDC 3000
- 10.4" colour LCD
- RS232 interface
- graphical curve of the injection/plasticising via the SPC (statistical process control) analysis
- 6-stage of the injection control (stroke dependent)
- 4-stage of the holding pressure control (time dependent)
Features include:
CLAMPING SYSTEM
- 1500 ton clamping force
- 2400mm opening stroke
- 3100mm maximum daylight
- 700-1400mm min/max mould height
- 1520 x 1420mm between tie bars
- 2400 x 2400mm platen size
- 20 ton x 250mm hydraulic ejector
INJECTION SYSTEM
- shot volume (cm3) 7433 / 9247
- shot weight(PS) (g) 6838 / 8508
- screw diameter (mm) 130 / 145
- injection pressure (kgf/cm2) 1860 / 1490
- injection rate (cm3/sec) 1213 / 1509
- plasticising capacity(PS) (g/sec) 162 / 201
- screw stroke 560mm
- screw rotation 0-120rpm
POWER SYSTEM
- 205kW (275Hp) pump motor
- 61.4kW / 67.8kW heating capacity
- 175kgf/cm2 maximum system pressure
- 3000L oil tank capacity
GENERAL
- dimensions (LxWxH mm): 12000 x 3800 x 3700
- weight (ton): 84.4
CONTROL
- CDC 3000
- 10.4" colour LCD
- RS232 interface
- graphical curve of the injection/plasticising via the SPC (statistical process control) analysis
- 6-stage of the injection control (stroke dependent)
- 4-stage of the holding pressure control (time dependent)
click thumbnails to view larger photo
