here Chen Hsong Supermaster SM 1450 TP SVP2 Injection Moulder | Applied Machinery
Browse Machine Categories arrow right
Sales Hotline
sales hotline (03) 9706 8066
sales email sales hotline
search icon
Plastics
 CHEN HSONG SUPERMASTER SM 1450 TP SVP2

CHEN HSONG SUPERMASTER SM 1450 TP SVP2

New
Stock No : 90404
Type : Injection Moulder
Manufacturer : Chen Hsong
Model : Supermaster SM 1450 TP SVP2
Year :
Brief Descriptions : 130mm screw, 7244g shot (PS), 1470 x 1370mm between tie bars, 1450 ton clamp force, Ai12 controller, nitrided screw and barrel, Euromap 12 robot interface
NEW Chen Hsong Supermaster two platen advanced servo drive series injection moulding machine.

Model:

- SM1450 TP SVP2
- real two platen, fasting clamping unit 750mm/sec

Q2 Injection Unit: (11 injection units to choose from, 22 different shot weights to choose from)

- Screw diameter: 130mm
- Shot weight: 7,244g (PS)
- Swept volume: 7,960cm3
- Injection pressure: 157MPa
- Injection stroke: 600mm
- Screw rotation speed: 110rpm (max)
- Injection rate: 1,117cm3/s
- L/D ratio: 20.3:1
- Nozzle contact force: 15 ton

- Space between tie bars: 1470 x 1370mm
- Clamp tonnage: 1,450ton
- Opening force: 125ton
- Clamp closing speed: 45m/min (max)
- Clamp opening speed: 45m/min (max)
- Opening stroke: 1650-2450mm
- Mould thickness: 550-1350mm
- Max. Daylight: 3,000mm
- Ejector force: 35ton (max)
- Ejector stroke: 400mm

- System pressure: 175kgf/cm2
- Servo motor power: 124.5kW
- Electrical heating power: 70kW
- Oil tank capacity: 2,400Lt
- Machine dimensions: 12.2 x 3.75 x 3.15m (L x W x H)
- Machine weight: 63 ton

Features include:

- Ai 12 Controller
- Linear transducer in clamping, injection, ejector
- Energy saving Servo drive system (SVP/2)
- Inovance servo drive
- Australian standard
- Standard nitrided screw and barrel
- Standard mould platen layout with Tslot
- Standard hydraulic ejector
- Digital nozzle temperature control and nozzle cover
- Standard hopper slider with standard hopper
- Pneumatic air blow out device, 1 set
- Standard Hydraulic core pulling device, 2 sets
- Digital back pressure control
- Automatic mould height adjustment
- Standard machine cover and colour
- Low pressure mould protection
- Cold start up prevention on barrel
- Standard ceramic heater bands
- Standard alarm light on machine
- Standard mould clamps and levelling pads (ie. J bolts)
- Euromap 12 robot interface
Enquire about this machine







Premium Machinery Manufacturers That We Represent